Northern Comfort Systems Heating, Cooling, Plumbing & Electrical Systems
Home
Coverage Club
A team you can trust
$20 Per Month Will Get You:
- Priority Service
- 1 Year Warranty HVAC/3 Year Warranty Plumbing & Electrical
- Never a Dispatch Fee
- Exclusive Access
- 100% Satisfaction Guaranteed
- Never Pay Twice for the Same Repair
- Never Pay Full Price Savings (20% – $250 MAX)
- Annual Plumbing Inspection
- Annual Electrical Inspection
Free Estimate
Heating Maintenance
- Burners pulled and cleaned
- Flame sensor pulled and cleaned
- Filter checked/cleaned
- Temperature rise verified
- Inspect overall condition of the unit
- Condensate line/trap cleaned
- Blower and inducer motor amps verified
- Capacitors checked and verified within range
- Thermostat batteries checked/replaced as needed
- Flue piping inspected
- Full camera inspection of heat exchanger
- Blower pulled and cleaned – if needed and accessible
- Gas pressure(s) verified
- Ignitor operation and range verified
- Heating elements inspected and tested
Cooling Maintenance
- Condenser coil chemically cleaned
- Evaporator coil chemically cleaned
- Filters Checked / Changed
- Superheat/Subcooling verified
- Inspect overall condition of the unit
- Compressor and windings checked and verified in range
- Condenser motor starter checked and verified in range
- Blower motor pulled and cleaned – if needed and accessible
- All electrical components checked and verified in range
- Condenser fan motor checked
- Temperature Drop verified
- Thermostat operation verified
- Condensate Drain(s) checked/cleared
- Verify refrigerant pressures
- Inspect overall condition of the unit
Plumbing Maintenance
- Test all valves for proper operation and leaks
- Verify and inform homeowner of location of main water shutoff
- Checking all drains for leaks – Quite often, there is a leak which over time can cause a lot of damage
- Checking washing machine hoses, as they are a big source of water leaks in the home and should have stainless braided hoses
- Inspecting toilet components and change standard flapper(s) in up to two toilets as needed
- Checking for leaks and perform a dye test on toilets when requested
- Power flushing of water heater to remove all particulate
- Verify age and condition of water heater
- Inspect garbage disposal for proper operation and check for leaks
- Whole home water quality test to be completed upon request
- Descale, cleaning and service of all filters (tankless water heater only)
- Perform all manufacturer‑recommended maintenance (tankless water heater only)
Electric Maintenance
- Testing all GFI receptacles and arc fault circuits both inside and outside the home
- Testing and inspecting all smoke detectors and batteries
- Checking all connections inside the electrical panel ensuring everything is safe and up to code
- Making sure the appropriate breakers are present and wiring size and manufacturer match and meet code regulation
- Testing main electrical panel outside for safety
- Locating main electrical breaker and show homeowner location in case of emergency
- Testing and inspection of all switches
Generator Maintenance
- Clean and inspect generator system
- Synthetic oil and filter change
- Air‑cooled OR liquid‑cooled break‑in
- Check all fluids, cooling system, and exhaust system
- Clean out intake and exhaust vents
- Load test battery and check battery condition
- Check fan belts, adjust tension as needed
- Check or change spark plug and wires; check gap
- Inspect and test fuel system
- Apply corrosion inhibitor
- Clean out generator and battery compartment of debris